1、 After The Electric Basket Is Transported To The Construction Site, All Components To Be Installed Shall Be Inspected And Checked. 2、 Install The Roof Suspension Device In A Flat And Protected Place. The Number Of Counterweights Will Then Be Determined. Fix The Counterweight On The Counterweight Frame. 3、 After Installing The Roof Support, Install The Basket Body Of The Electric Basket At The Corresponding Ground Position. After The Installation, Check Whether The Parts In Each Place Are Installed Properly And Whether The Bolts Are Loose. 4、 Fix The Safety Rope To The Fixed Point In The House, And Then Put It Down Along The Wall. An Electric Basket Must Have A Safety Rope To Ensure The Safety In The Construction Process. 5、 After Installation And Play, Connect The Power Supply For Trial Operation. At Runtime, Run At Least Three To Five Times To Ensure Safe Use. After Being Qualified, We Can Arrange The Acceptance Of The Electric Basket. 6、 After The Equipment Acceptance, The Construction Party And The Acceptance Party Need To Sign An Acceptance Certificate Before The Electric Basket Can Be Delivered To The Construction Party For Use. 7、 During The Construction, It Should Be Noted That After The Construction Of The Floors Below The 18th Floor, The Basket Body Of The Basket Needs To Be Lowered To The Ground. Then Remove The Safety Rope And Bracket, And Start The Installation From The New Installation Site. Then Lift The Basket. When The Basket Is Not On The Ground, It Is Forbidden To Move Its Position. If It Must Move, The Power Must Be Cut Off First. So As To Avoid Accidents Caused By Operational Errors. 8、 After The Completion Of Construction, Inform The Construction Party And The Acceptance Party To Check Whether The Equipment Is Damaged Or Lost. If They Do Not Sign On The Exit Sheet, They Can Arrange The Exit Of The Electric Basket.