I'm Sure You've Seen A Lot Of Window Cleaning Machines. In Fact, There Are Many Types Of Window Cleaning Machines. The Following Mainly Introduces The Information About Wheel Mounted Window Cleaning Machines And Stick In Window Cleaning Machines, Hoping To Make You Know More About Stick In Window Cleaning Machines. Generally, The Following Conditions Must Be Met For The Installation Of Wheel Mounted Window Cleaning Machine: (1) The Traveling Passage Of The Window Cleaning Machine Is A Rigid Roof With A Slope Of Less Than 2%. (2) The Extension Distance Of The Lifting Arm Of The Window Cleaning Machine Is Small (generally Less Than 5000mm), And The Weight Of The Whole Machine Is Less Than 5000kg (due To The Heavy Weight Of The Equipment, It Is Inconvenient To Walk). (3) In Order To Make The Window Cleaning Machine In Place Accurately And Walk Freely, A Simple Guide Track Is Usually Laid On The Parapet Or Walking Floor. (4) Insert Bar Type Window Cleaning Machine: This Machine And The Track Base Of The Track Type Window Cleaning Machine Have Basically The Same Structural Requirements And Construction Methods, The Difference Is That It Only Casts A Row Of Independent Bases, And Embeds The First-class Reinforcement Larger Than & Oslash; 20. The Following Points Shall Be Paid Attention To In The Design And Installation Of The Base Of The Pole Type Window Cleaner: (1) Considering The Weight Of Each Part Of The Window Cleaner, The Dead Weight Of The Inserting Rod, The Lateral Force Caused By The Operation And The Force Caused By The Wind Load, The Position Of The Base Shall Be Close To The Parapet As Far As Possible To Reduce The Cantilever Length Of The Inserting Rod. (2) The Inserting Rod Must Have Enough Height, And The Space Occupied By The Building Decoration Should Be Fully Considered To Prevent The Crane Boat From Colliding With The Building When Recovering The Roof. (3) The Base Shall Be Set On The Structural Beam Or Thick Floor As Far As Possible In Combination With The Building Structure, So As To Reduce The Impact Of The Load Of The Inserting Rod On The Roof Structure. (4) Fully Consider The Dead Weight Of The Inserting Rod To Facilitate The Installation And Manual Displacement Of The Inserting Rod.