In The Construction Elevator, The Following Will Explain The Specific Contents, Which Can Be Summarized Into Two Parts, Mainly As Follows: Content 1: Is The Construction Elevator The Same As The Construction Elevator? Content 2: What Are The Safety Devices In The Construction Elevator? Now That The Above Is Summarized And Put Forward, The Following Editor Will Expand The Specific Content, So That You Can Better Understand And Understand The Product, And Increase Your Knowledge In This Area. Is The Construction Elevator The Same As The Construction Elevator? Answer: Both Of Them Are The Same. Construction Elevator Is A Common Term For Construction Elevator, Which Means The Same. The Safety Device In The Construction Elevator Is A Very Important Part. What Are The Specific Ones? The Following Small Edition Will Elaborate On Its Types. Speed Limiter: It Is Mainly Used To Prevent The Cage Of The Construction Elevator From Speeding Up And Down Or Falling. There Are Two Kinds: One-way And Two-way. One-way Can Only Be In The Cage Falling Direction, And Two-way Can Be Both Up And Down. Buffer Spring: Generally Installed On The Spring Seat, And The Spring Seat Is Connected With The Base Frame. It Has Two Functions, One Is To Reduce The Buffer Of Cage Falling, The Other Is To Reduce The Impact Of Cage And Counterweight Landing. Upper And Lower Limit Stops: To Prevent The Cage From Going Up And Down Beyond The Stop Position, Thus Causing Accidents. It Is Generally Installed On The Cage And Guide Rail Frame. Emergency Stop Switch: When An Emergency Occurs, Pressing The Emergency Stop Switch Can Stop The Movement Of The Cage, Which Is Generally Installed On The Top Of The Cage.